features ? plastic material has underwriters laboratory flammability classification 94v-o ? ideal for printed circuit board ? reliable low cost construction utilizing molded plastic technique ? surge overload rating : 70 amperes peak GBP300~gbp3010 in-line glass passivated single-phase bridge rectifier voltage - 50 to 1000 volts current - 3.0 amperes mechanical data terminals: leads solderable per mil-std-202, method 208 mounting position: any weight: 0.06 ounce, 1.7 grams maximum ratings and electrical characteristics rating at 25cambient temperature unless otherwise specified. resistive or inductive load, 60hz. for capacitive load derate current by 20%. .045 ( 1.15 ) .581 ( 14.75 ) .561 ( 14.25 ) .414 ( 10.50 ) .397 ( 10.10 ) c .111 ( 2.8 ) .160 ( 4.06 ) .144 ( 3.65 ) .131 ( 3.35 ) .044 ( 1.10 ) .031 ( 0.80 ) .099 ( 2.5 ) .082 ( 2.1 ) .577 ( 14.65 ) .557 ( 14.15 ) .034 ( 0.86 ) .026(0.65) .057 ( 1.45 ) .140 ( 3.56 ) .026 ( 0.66 ) .013(0.35) .160 ( 4.06 ) .140 ( 3.56 ) .160 ( 4.06 ) .140 ( 3.56 ) gbp unit: inch ( mm ) maximum recurrent peak reverse voltage maximum rms input voltage maximum dc blocking voltage maximum average rectified output current at 50c ambient. peak one cycle surge overload current maximum instantaneous forward voltage drop per bridge element at 1.5a dc maximum ( total bridge) reverse leakage at rated t a =25 cdc blocking voltage per element t a =100c i2t rating for fusing ( t<8.35ms) typical junction capacitance per leg (note 1) typical thermal resistance per leg (note 2) r ja r jl operating temperature range, t j storage temperature range,tstg v v v a c / w unit c a 3.0 1.0 20.0 5.0 500 25.0 34.0 15.0 -55 to +125 pf a 70.0 v a 2 s notes: 1. measured at 1.0mhz and applied reverse voltage of 4.0 volts 2. thermal resistance from junction to ambient and from junction to lead mounted on p.c.b with 0.47 x 0.47"(12 x 12mm)copper p ads. c -55 to +150 200 140 200 50 35 50 100 70 100 400 280 400 600 420 600 800 560 800 1000 700 1000 GBP300 gbp301 gbp302 gbp304 gbp306 gbp308 gbp3010 http://www.trr-jx.com
b ridge output full wave rectified current averes amperes ambient temperature c fig. 1- derating curve for output rectified current o rating and characteristic curves instantaneous forward voltage, volts fig. 2- typical instantaneous forward characterisitcs (25 o c) instantaneous forward current, amperes fprward surge current, amperes pk (half sine-wave) no.ofcyclesat60hz f ig. 4- maximum non-repetiteve peak forward surge current 2.5 1.5 0.5 0 0 50 100 150 50 40 30 20 10 0 12 6 10 20 40 60 100 .02 .01 .03 .05 .07 .1 .2 .3 .5 .7 .8 .9 1.0 2.0 3.0 4.0 5.0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 i nstantaneous reverse current, microamperes percent of peak reverse voltage fig. 3- typical reak r everse charact eristics t= 100 c a o 10 1.0 0.1 0.01 0 20 40 60 80 100 120 140 2.0 1.0 3.0 t= 25 c a o 60 70 GBP300~gbp3010 in-line glass passivated single-phase bridge rectifier http://www.trr-jx.com
|
